CANLI
Yükleniyor Veriler getiriliyor…
SCI-Expanded Özgün Makale Scopus
Pyrolysis of goat manure to produce bio-oil
Engineering Science and Technology, an International Journal 2019
Scopus Eşleşmesi Bulundu
61
Atıf
22
Cilt
452-457
Sayfa
🔓
Açık Erişim
Özet
In this paper, biomass in goat manure form is pyrolyzed by a fixed-bed reactor. The influence of the temperature within the range of 300–600 °C is to be detected in solid, liquid and gas products. Different product yields emerge according to the pyrolysis temperature. At 500 °C, the product yield reaches the maximum valuation, the bio-oil obtained at this temperature is analyzed via gas chromatography and mass spectrometry (GC/MS) and elemental analysis. The highest efficiency of the bio-oil reached at 26.1% by weight at 500 °C. As a result of the TGA analysis, it was observed that the maximum separation rate was between 250 and 500 °C and the conversion was complete at about 600 °C. Elemental analysis proved that the amount of oxygen in the bio-oil was 23.15% and carbon was 51.75%, while the amount of oxygen in the raw material was 39.85% and carbon was 42.08%. In addition, the pH value of the bio-oil was 4.12. Bio-oil combination product involves organic compounds for instance, benzenes, alcohols, alkanes, alkenes, ketones, phenols and polyaromatic hydrocarbons (PAHs). These results depict goat manure can be used as a precious raw material in bio-oil production.

Havuzumuzdaki Atıflar 0

Bu makaleye, sistemimizdeki Scopus veritabanında bulunan 0 makale atıf yapmıştır. Scopus genel atıf sayısı: 61.

Bu makaleye, kendi Scopus havuzumuzdaki başka bir makaleden atıf kaydı bulunmuyor.
Scimago Dergi Bilgisi Otomatik ISSN Eşleştirmesi 2019 yılı verileri
Engineering Science and Technology, an International Journal
Q1
SJR Quartile
0,750
SJR Skoru
94
H-Index
🔓
Açık Erişim
Kategoriler: Civil and Structural Engineering (Q1) · Computer Networks and Communications (Q1) · Electronic, Optical and Magnetic Materials (Q1) · Fluid Flow and Transfer Processes (Q1) · Hardware and Architecture (Q1) · Mechanical Engineering (Q1) · Metals and Alloys (Q1) · Biomaterials (Q2)
Alanlar: Chemical Engineering · Computer Science · Engineering · Materials Science
Ülke: Netherlands · Elsevier B.V.
Bu bilgiler makale yılına göre Scimago veritabanından ISSN eşleştirmesiyle otomatik getirilmektedir. Dergi sıralama verileri Scimago'nun ilgili yılı baz alınmaktadır.

Anahtar Kelimeler

Bu makale için anahtar kelime bilgisi bulunmuyor.

Makale Bilgileri

Dergi Engineering Science and Technology, an International Journal
ISSN 22150986
Yıl 2019 / 4. ay
Makale Türü Özgün Makale
Hakemlik Hakemli
Endeks SCI-Expanded
Teşvik Puanı 2,70 · YÖKSİS Akademik Teşvik
Yayın Dili İngilizce
Kapsam Uluslararası
Toplam Yazar 3 kişi
Erişim Türü Elektronik
Alan Mühendislik Temel Alanı- Makine Mühendisliği

YÖKSİS Yazar Kaydı

Yazar Adı ERDOĞDU AHMET EMRAH,POLAT REFİK,ÖZBAY GÜNAY
YÖKSİS ID 3748342

Metrikler

Scopus Atıf 61
Havuz Atıfları 0
Teşvik Puanı 2,70
Yazar Sayısı 3