CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS DOI Eşleşti SJR Q1

Embedded Fuzzy Logic Control System for Refrigerated Display Cabinets

Arabian Journal for Science and Engineering · Kasım 2019

Özet
Having done in this study, embedded fuzzy logic control system (EFLCS) was designed and implemented for closed refrigerated display cabinets (CRDC) to meet the required storage conditions for the pastry productions stored in CRDCs. The system keeps the temperature and relative humidity (RH) of CRDC at approximately +4∘C and 80% RH, respectively. It has two fuzzy logic controllers. One of them controls the speed levels of the fans, and the other controls the steam level of ultrasonic atomizer. Temperature and RH values are read by sensor SHT11 and transferred to PIC18F4620 microcontroller that is programmed with fuzzy Logic approach. On the other hand, the compressor was controlled with on–off control in the range of 3–5∘C. On the condition of starting from +7∘C temperature, the time to approach to the set values (4∘C and 80% RH) for traditional system and EFLCS is 191.8 and 109.6 s, respectively. Additionally, the ranges of temperature and RH obtained by EFLCS are between 4.44 and 3.69∘C and between 81.33% RH and 78.57% RH, respectively. The temperature and RH values obtained by traditional system are between 5.56 and 3.2∘C and between 61.81% RH and 57.45% RH, respectively. Traditional system never reached to desired humidity value (80% RH). It has been seen that developed EFLCS becomes stable in shorter time than traditional system and kept the desired values as almost constants.
3 atıf Kasım 2019 DOI
YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
Embedded Fuzzy Logic Control System for Refrigerated Display Cabinets
Arabian Journal for Science and Engineering · 2019 SCI-Expanded
Doç. Dr. KEMAL TÜTÜNCÜ →
Embedded Fuzzy Logic Control System for Refrigerated Display Cabinets
Arabian Journal for Science and Engineering · 2019 SCI-Expanded
Doç. Dr. KEMAL TÜTÜNCÜ →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Bu dergide (ISSN eşleşmesi) kurumun 18 kaydı bulundu.
New WOA Variants for Superior Meta-heuristic Optimization with Multiple Hunter Whale Leading
2025 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi SEMA SERVİ →
A New Lifetime Model: Properties, Estimation, and Applications in Quality Control
2025 ISSN: 2193-567X SCI-Expanded Q2
Arş. Gör. ERDEM CANKUT →
Brain Tumor Detection with Transfer Learning Models Based on Attention Modules
2026 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi ZÜLEYHA YILMAZ ACAR →
Comparative Application of Speed and Regenerative Braking Process of an Electric Vehicle Using Intelligent Control Methods
2026 ISSN: 2193-567X SCI
Doç. Dr. ALİ YAŞAR →
Effect of Silica/Graphene Nanohybrid Particles on the Mechanical Properties of Epoxy Coatings
2019 ISSN: 2193-567X SCI-Expanded Q3
Doç. Dr. ŞAKİR YAZMAN →
Heuristic Optimization Based on Penalty Approach for Surface Permanent Magnet Synchronous Machines
2020 ISSN: 2193-567X SCI-Expanded Q1
Prof. Dr. MEHMET ÇUNKAŞ →
A Method of Classification Performance Improvement Via a Strategy of Clustering-Based Data Elimination Integrated with k-Fold Cross-Validation
2020 ISSN: 2193-567X SCI-Expanded Q2
Doç. Dr. MUSTAFA SERTER UZER →
Training Feed-Forward Multi-Layer Perceptron Artificial Neural Networks with a Tree-Seed Algorithm
2020 ISSN: 2193-567X SCI-Expanded Q3
Doç. Dr. AHMET CEVAHİR ÇINAR →
Solving Multi‑Objective Resource Allocation Problem Using Multi‑Objective Binary Artificial Bee Colony Algorithm
2021 ISSN: 2193-567X SCI-Expanded Q3
Dr. Öğr. Üyesi ZÜLEYHA YILMAZ ACAR →
Theoretical and Experimental Investigation of the Performance of an Atkinson Cycle Engine
2021 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi HALİL ERDİ GÜLCAN →
Optimization of Electricity Generation Parameters with Microbial Fuel Cell Using the Response Surface Method
2022 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. ŞAKİR TAŞDEMİR →
The Innovative Approach to Real-Time Detection of Fuel Types Based on Ultrasonic Sensor and Machine Learning
2024 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. MEHMET ÇUNKAŞ →
Enhanced Gain Dual-Port Compact Printed Meandered Log-Periodic Monopole Array Antenna Design with Octagonal-Ring Shaped FSS for Broadband 28 GHz Applications
2024 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi MEHMET YERLİKAYA →
The Innovative Approach to Real-Time Detection of Fuel Types Based on Ultrasonic Sensor and Machine Learning
2024 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi UĞUR TAŞKIRAN →
Determination of Temperature Effects on Cortical Bone Milling Using Taguchi Method
2025 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. SÜLEYMAN NEŞELİ →
Performance and Availability Analysis of API Design Techniques for API Gateways
2025 ISSN: 2193-567X SCI-Expanded Q2
Prof. Dr. FATİH BAŞÇİFTÇİ →
New WOA Variants for Superior Meta-heuristic Optimization with Multiple Hunter Whale Leading
2025 ISSN: 2193-567X SCI-Expanded Q2
Dr. Öğr. Üyesi ONUR İNAN →
Characterizing Machining Indicators with Machine Learning Models Under Cellulose Nanocrystal and Graphene-Based Nanofluid Conditions
2025 ISSN: 2193-567X SCI-Expanded Q2
Doç. Dr. MUSTAFA KUNTOĞLU →

Makale Bilgileri

Toplam Atıf 3 atıf · Scopus
ISSN2193567X
Yayın TarihiKasım 2019
Cilt / Sayfa44 · 9529-9543

Kurumlar

Selçuk Üniversitesi
Selçuklu Turkey

Havuzumuzdaki Atıflar 0

Bu makaleye, sistemimizdeki Scopus veritabanında bulunan 0 makale atıf yapmıştır. Scopus genel atıf sayısı: 3.

Bu makaleye, kendi Scopus havuzumuzdaki başka bir makaleden atıf kaydı bulunmuyor.
Scimago Dergi (ISSN Eşleşmesi)
Arabian Journal for Science and Engineering
Q1
SJR Skoru0,545
H-Index89
ÜlkeGermany
Multidisciplinary (Q1)
Dergi sayfasına git

Metrikler

3
Atıf

Sistemimizdeki Yazarlar