CANLI
Yükleniyor Veriler getiriliyor…
/ Makaleler / Scopus Detay
Scopus YÖKSİS DOI Eşleşti SJR Q2

Antibacterial effect of dental cements evaluated using agar diffusion test

Journal of Adhesion Science and Technology · Ağustos 2015

Özet
Purpose: Secondary caries can occur around the restoration, fixed prosthesis, and orthodontic band margins because of cariogenic bacteria. Long-lasting antibacterial effectiveness of dental cements used contemporarily can reduce this phenomenon. The purpose of this study was to examine the antibacterial activities of nine dental cements (BisCem®, Super-Bond C&B, Rely XTM, PanaviaTM F 2.0, Variolink® II, UnitekTM Multi Cure, Multilink® Automix, ClearfilTM Esthetic Cement, TransbondTM LR) using agar diffusion test. Materials and methods: The test materials were inserted into the wells of Muller Hinton agar plates inoculated with Streptococcus mutans and Streptococcus salivarious. The diameters of the inhibition zones produced around the materials were measured after 24 h of incubation. Two-Way ANOVA, the Kruskal-Wallis, and the Mann-Whitney U tests at a significance level of p < 0.05 were analyzed for the results. Results: Unitek Multi Cure cement exhibited a significant difference from the control group against both S. mutans and S. salivarious (p < 0.05). While the zone of inhibition of Unitek Multi Cure cement was shorter (8.50 ± 1.77) than the control group (12.63 ± 1.30), Unitek Multi Cure had antibacterial effect against S. mutans and S. salivarious (p < 0.05). S. mutans displayed a significantly lower resistance to Unitek Multi Cure, BisCem, and Superbond C&B than S. salivarious (p < 0.05). Conclusion: Conventional glass ionomer cement, Unitek Multi Cure, exhibited greatest in vitro antibacterial activity against both S. mutans and S. salivarious. Formation of dental caries had been suppressed by the fluoride-releasing GICs.
3 atıf Ağustos 2015 DOI
YÖKSİS DOI Eşleşmesi Bulundu

Bu Scopus makalesi YÖKSİS veritabanında da kayıtlı. Aşağıda YÖKSİS verilerini görebilirsiniz.

YÖKSİS Kayıtları
Antibacterial effect of dental cements evaluated using agar diffusion test
Journal of Adhesion Science and Technology · 2015 SCI
Dr. Öğr. Üyesi YASEMİN KARYEYEN →
YÖKSİS Kayıtları — ISSN Eşleşmesi
Bu dergide (ISSN eşleşmesi) kurumun 20 kaydı bulundu.
Are dentin posts biomechanically intensive A laboratory and FEA study
2014 ISSN: 0169-4243 SSCI
Prof. Dr. OĞUZ ERASLAN →
Does 2 chlorhexidine digluconate cavity disinfectant or sodium fluoride hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin
2015 ISSN: 0169-4243 SSCI
Prof. Dr. ALİ RIZA ÇETİN →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AHMET OKUDAN →
Effects of the functional groups of polystyrene on its adhesion improvement and corrosion resistance
1998 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AHMET OKUDAN →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. ÖZGÜR ÖZDEMİR →
Adhesion and corrosion resistance properties of coatings obtained from modified low molecular weight polystyrenes
2006 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AHMET KOÇAK →
Response of exposed human pulp to application of a hemostatic agent and a self etch adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. NEVİN ÇOBANOĞLU →
POLYTETRAFLUOROETYLENE TAPE AS TEMPORARY RESTORATIVEMATERIAL A FLUID FILTRATION STUDY
2015 ISSN: 0169-4243 Endekste taranmıyor
Prof. Dr. SEMA BELLİ →
Which is effective on bond strength of resin based sealers incorporation of powdered dentin to primer or adhesive
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Effect of 2 chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth coloured restorative materials to sound and caries affected dentin
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
The effect of different restoration techniques on fracture strength of teeth with flared roots
2014 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. SEMA BELLİ →
Functionalization of polystyrene and adhesion studies
1997 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. ERSİN GÜLER →
Effect of intracanal medicaments on the push out bond strength of Biodentine in comparison with Bioaggregate apical plugs
2015 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. AYÇE ÜNVERDİ →
Comparison of the mechanical and biological properties of self adhering materials
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. HAYRİYE ESRA ÜLKER →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er,Cr:YSGG laser etching
2017 ISSN: 0169-4243 SCI
Prof. Dr. İSA YÖNDEM →
Comparison of the mechanical and biological properties of self-adhering materials
2016 ISSN: 0169-4243 SCI-Expanded Q3
Doç. Dr. FİRDEVS KAHVECİOĞLU →
Residual monomer release from orthodontic adhesives cured with different light sources
2016 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. MURAT SELİM BOTSALI →
Effect of post restoration on stresses in premolars with endodontic periodontal lesion an FEA study
2017 ISSN: 0169-4243 SCI-Expanded
Prof. Dr. OĞUZ ERASLAN →
Shear bond strength to enamel and failure type of different periodontal splints :in vivo and in vitro study
2016 ISSN: 0169-4243 SCI-Expanded Q3
Doç. Dr. MERVE GÜRSES →
The effects of water flow rate on shear bond strength of self etch resin cement to dentin surface after Er Cr YSGG laser etching
2016 ISSN: 0169-4243 SSCI
Prof. Dr. İSA YÖNDEM →

Makale Bilgileri

Toplam Atıf 3 atıf · Scopus
ISSN01694243
Yayın TarihiAğustos 2015
Cilt / Sayfa29 · 1535-1542

Kurumlar

Bolu Abant İzzet Baysal Üniversitesi
Bolu Turkey
Selçuk Üniversitesi
Selçuklu Turkey

Havuzumuzdaki Atıflar 0

Bu makaleye, sistemimizdeki Scopus veritabanında bulunan 0 makale atıf yapmıştır. Scopus genel atıf sayısı: 3.

Bu makaleye, kendi Scopus havuzumuzdaki başka bir makaleden atıf kaydı bulunmuyor.
Scimago Dergi (ISSN Eşleşmesi)
Journal of Adhesion Science and Technology
Q2
SJR Skoru0,548
H-Index92
YayıncıTaylor and Francis Ltd.
ÜlkeUnited Kingdom
Chemistry (miscellaneous) (Q2)
Materials Chemistry (Q2)
Mechanics of Materials (Q2)
Surfaces and Interfaces (Q2)
Surfaces, Coatings and Films (Q2)
Dergi sayfasına git

Metrikler

3
Atıf