Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Some physical properties of edible squash (Cucurbita pepo L.) seeds
Scopus
Toplam 117 atıf DOI
Some physical properties of squash seeds at different moisture content (6.4-52.9%) were estimated. The role of moisture content was also studied. The results revealed that the mean values of seed length, width, thickness, geometric mean diameter, sphericity %, mass and volume were 18.16, 9.80, 2.67 mm, 43.0%, 0.29 g and 0.73 cm3, respectively. As moisture content increased from 6.4% to 52.9%, bulk density, true density, porosity %, projected area and terminal velocity increased from 350 to 475, 450 to 625 kg/m 3, 22.2% to 24.0%, 1.45 to 1.88 cm2 and 4.37 to 6.13 m/s, respectively. The corresponding values for squash kernel were 406-460, 615-657 kg/m3, 33.98-29.71%, 2.45-2.86 cm2, and 5.02-6.57 m/s, respectively. In contrast, the rupture strength of squash seeds decreased as the moisture content increased. The static coefficient of friction of squash seeds fluctuated from 0.18 to 0.64 over the surfaces of different materials. © 2004 Elsevier Ltd. All rights reserved.
Atıf Kaynağı
Atıf Yapan Yayın
Determination of nutritional and mineral constituents and physical characteristics of Yubka kidney bean seeds from Talas region of Kyrgyzstan
Scopus
Havuzumuzda Open Access 2 atıf almış
This study determined the nutrient ingredients and physical characteristics of kidney beans (Phaseolus Vulgaris) cv. Yubka cultivated in the Talas region of Kyrgyzstan. Physical properties were analyzed at moisture amount in the range of 8.4% to 30% d.b. using re-wetted kidney beans. The average, width, length, thickness, arithmetic mean diameter and geometric mean diameter were 14.2, 9.5, 7.3, 9.9 mm, 10.3 mm at initial moisture level (%8.4). The nutrient ingredients of kidney bean seeds, bearing; crude protein, crude cellulose, lower heating value, ash, organic matter, were found to be 14.4%, 3.8%, 18,67 Mj/kg, 3.86%, and 96.14% at natural moisture levels (%8.4), respectively. Mineral ingredients of kidney bean seeds, bearing; B, Cu, Fe, Mn, Zn, K, P, Ca, S and Mg, were defined at 53.5 ppm, 6.9 ppm, 66.9 ppm, 18.6 ppm, 25.06 ppm, 1.5%, 0.4%, 0.2%, 0.02%, and 0.19%, respectively.
Atıf Yapan Makale Bilgileri
Kurumlar (1)
Selçuk Üniversitesi
Selçuklu, Turkey