Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Modeling of cutting parameters and tool geometry for multi-criteria optimization of surface roughness and vibration via response surface methodology in turning of AISI 5140 steel
Scopus
Open Access Toplam 119 atıf DOI
AISI 5140 is a steel alloy used for manufacturing parts of medium speed and medium load such as gears and shafts mainly used in automotive applications. Parts made from AISI 5140 steel require machining processes such as turning and milling to achieve the final part shape. Limited research has been reported on the machining vibration and surface roughness during turning of AISI 5140 in the open literature. Therefore, the main aim of this paper is to conduct a systematic study to determine the optimum cutting conditions, analysis of vibration and surface roughness under different cutting speeds, feed rates and cutting edge angles using response surface methodology (RSM). Prediction models were developed and optimum turning parameters were obtained for averaged surface roughness (Ra) and three components of vibration (axial, radial and tangential) using RSM. The results demonstrated that the feed rate was the most affecting parameter in increasing the surface roughness (69.4%) and axial vibration (65.8%) while cutting edge angle and cutting speed were dominant on radial vibration (75.5%) and tangential vibration (64.7%), respectively. In order to obtain minimum vibration for all components and surface roughness, the optimum parameters were determined as Vc = 190 m/min, f = 0.06 mm/rev, Κ = 60° with high reliability (composite desirability = 90.5%). A good agreement between predicted and measured values was obtained with the developed model to predict surface roughness and vibration during turning of AISI 5140 within a 10% error range.
Atıf Kaynağı
Atıf Yapan Yayın
Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
Scopus
Havuzumuzda 185 atıf almış
Monitoring of the cutting area with different type of sensors requires confirmation for composing sensor fusion to obtain longer tool life and high-quality product. The complex structure of machining and interaction between variables affect the influence of parameters on quality indicators. Using multiple sensors provide comparison of information acquired from different resources and make easier to decide about tool and workpiece condition. In this experimental research for the first time, five different sensors were adopted to a lathe for collecting data to measure the capability of each sensor in reflecting the tool wear. Cutting forces, vibration, acoustic emission, temperature and current measurements were carried out during turning of AISI 5140 with coated carbide tools. Considering the graphical investigation, the successes of sensors on detection of progressive flank wear and tool breakage were investigated. Besides, the effects of cutting parameters on measured variables were interpreted considering graphs. According to results, temperature and acoustic emission signals seem to be effective about 74% for flank wear. In addition, fuzzy logic based prediction of flank wear was performed with the assistance of temperature and acoustic emission sensors with high accuracy which demonstrates their availability for sensor fusion. Tool breakage occurs instantly which can prevent with the assistance of sensor signals and tangential and feed cutting forces, acoustic emission and vibration signals seem as reliable indicators for approaching major breakage. Sensor fusion based turning provides confirmed information which enables more reliable, robust and consistent machining.
Atıf Yapan Makale Bilgileri
Kurumlar (1)
Selçuk Üniversitesi
Selçuklu, Turkey