Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Experimental study and analysis of machinability characteristics of metal matrix composites during drilling
Scopus
Toplam 130 atıf DOI
In this study, the metal matrix composite materials were produced by hot press with various production parameters. The drilling experiments were performed on computer numerical control vertical machining centre without cutting fluid. Analysis of variance (ANOVA) was carried out in order to determine the effects of the production parameters on thrust force and surface roughness of metal matrix composites drilled with different feed rate. The effect of production parameters such as temperature, pressure and reinforcement ratio were investigated, and their effects were presented. The optimal level for each production parameters was determined by ‘Maximize the S/N ratio approach with a Taguchi design’. The test results revealed that the reinforcement ratio was the main factor affecting the surface roughness of the metal matrix composites for both feed rate. However, same singularity was not matter on thrust force due to close contribution rates of production parameters and high error rates of analysis. In literature, an increase on the thrust force and the surface roughness values was reported as the feed rate increased during machining. Nevertheless, in our MMCs system, the thrust force and the surface roughness values were in tendency of declination as the feed rate increased which makes this study more novel research.
Atıf Kaynağı
Atıf Yapan Yayın
Investigation of the Effects of Cooling and Lubricating Strategies on Tribological Characteristics in Machining of Hybrid Composites
Scopus
Havuzumuzda Open Access 58 atıf almış
Engineering materials are expected to contain physical and mechanical properties to meet the requirements and to improve the functionality according to their application area. In this direction, hybrid composites stand as an excellent option to fulfill these requests thanks to their production procedure. Despite the powder metallurgy method that allows for manufacturing products with high accuracy, machining operations are still required to obtain a final product. On the other hand, such materials are characterized with uncertainties in the structure and extremely hard reinforcement particles that aggravate the machinability. One of the prominent solutions for better machinability of composites is to use evolutionary cooling and lubricating strategies. This study focuses on the determination of tribological behavior of Cu-based, B-Ti-SiCP reinforced, about 5% wt. hybrid composites under milling of several environments, such as dry, minimum quantity lubrication (MQL)-assisted and cryogenic LN2-assisted. Comprehensive evaluation was carried out by considering tool wear, temperature, energy, surface roughness, surface texture and chips morphology as the machinability characteristics. The findings of this experimental research showed that cryogenic cooling improves the tribological conditions by reducing the cutting temperatures, flank wear tendency and required cutting energy. On the other hand, MQL based lubricating strategy provided the best tool wear index and surface characteristics, i.e., surface roughness and surface topography, which is related to spectacular ability in developing the friction conditions in the deformation zones. Therefore, this paper offers a novel milling strategy for Cu-based hybrid composites with the help of environmentally-friendly techniques.
Atıf Yapan Makale Bilgileri
Kurumlar (4)
Bingöl Üniversitesi
Bingol, Turkey
Inönü Üniversitesi
Malatya, Turkey
Selçuk Üniversitesi
Selçuklu, Turkey
South Ural State University
Chelyabinsk, Russian Federation