CANLI
Yükleniyor Veriler getiriliyor…
/ Atıflar / Detay

Atıf Detayı

Kurum makalesi · Scopus üzerinden alınan atıf kaydı

Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
A comparative analysis of the engine performance, exhaust emissions and combustion behaviors of a compression ignition engine fuelled with biodiesel/diesel/1-butanol (C4 alcohol) and biodiesel/diesel/n-pentanol (C5 alcohol) fuel blends
Energy Cilt 165 ss. 1332-1351
Scopus Toplam 138 atıf DOI
In this study, engine performance, exhaust emissions and combustion behaviors of a single-cylinder, four-stroke, direct-injection diesel engine running on biodiesel/diesel/1-butanol and biodiesel/diesel/n-pentanol fuel blends were investigated and compared with diesel fuel under different engine speeds and full load operating conditions. Test fuels were prepared with 5 and 10 vol% 1-butanol and n-pentanol. Engine test results indicated that brake powers and torques decreased as the amount of alcohol increased, while BSFC increased between 0.77% and 8.07%. Alcohol blended fuels acquired lower EGT and CO2, while observing higher O2 emission due to high oxygen content of alcohol compared to diesel fuel. Alcohol treated blends also diminished NOX by 0.56–2.65%, CO by 6.90–32.40%, and smoke by 10.47–44.43%. Moreover, n-pentanol blended fuels showed better performance and emission results than 1-butanol blends. Maximum in-cylinder pressure of higher alcohol blended fuels found between 94.55 and 95.82 bar at 371-372oCA for 1400 rpm, and between 78.19 and 82.19 bar at 375-376oCA for 2600 rpm. Alcohol addition into the blends increased maximum in-cylinder pressure up to 1.38% at low speed, whereas it decreased up to 3.75% at high speed. Furthermore, higher HRR values up to 8.5% were observed with the alcohol mixed fuels. Consequently, higher alcohols (n-pentanol and 1-butanol) can be utilized as alternative additives in biodiesel/diesel blends for diesel engines to improve emissions, although they adversely influence engine performance.
Atıf Kaynağı
Atıf Yapan Yayın
Experimental Study of Hydrogen Addition on Waste Cooking Oil Biodiesel-Diesel-Butanol Fuel Blends in a DI Diesel Engine
Bioenergy Research Cilt 12 ss. 443-456
Scopus Havuzumuzda 53 atıf almış
In this study, the effects of hydrogen addition on diesel-biodiesel-butanol fuel blends were investigated in terms of engine performance, combustion, and emission characteristics under different engine operating conditions. The experiments were performed with eight different fuel blends at a constant engine speed of 2000 rpm, which is the maximum torque value of all test fuels. The four operating conditions were at 25%, 50%, 75%, and 100% engine loads. Hydrogen was delivered to diesel-biodiesel-butanol fuel blends through the intake manifold with different rates of fuel mass consumption. The experiment results were compared with euro diesel and absence of hydrogen addition for all test fuels. The experimental results have revealed that at 2000 rpm engine speed, the brake torque, in-cylinder pressure, and exhaust gas temperature increased with the addition of hydrogen. Nevertheless, the brake-specific fuel consumption, carbon monoxide (CO), carbon dioxide (CO2), hydrocarbon (HC), nitrogen oxides (NOx), and smoke opacity emissions decreased under various engine conditions. The heat release rate was generally shown to be decreased with higher engine loads and increased with lower engine load conditions, while a rise in thermal efficiency was observed. Therefore, the addition of hydrogen in a diesel engine usually exhibited fewer emissions, improved the combustion process, and increased the brake torques of the engine by comparison to the absence of hydrogen addition.
Atıf Yapan Makale Bilgileri
Kurumlar (3)
Bayburt Üniversitesi Bayburt, Turkey
Erciyes Üniversitesi Kayseri, Turkey
Selçuk Üniversitesi Selçuklu, Turkey