Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Investigation of signal behaviors for sensor fusion with tool condition monitoring system in turning
Scopus
Toplam 185 atıf DOI
Monitoring of the cutting area with different type of sensors requires confirmation for composing sensor fusion to obtain longer tool life and high-quality product. The complex structure of machining and interaction between variables affect the influence of parameters on quality indicators. Using multiple sensors provide comparison of information acquired from different resources and make easier to decide about tool and workpiece condition. In this experimental research for the first time, five different sensors were adopted to a lathe for collecting data to measure the capability of each sensor in reflecting the tool wear. Cutting forces, vibration, acoustic emission, temperature and current measurements were carried out during turning of AISI 5140 with coated carbide tools. Considering the graphical investigation, the successes of sensors on detection of progressive flank wear and tool breakage were investigated. Besides, the effects of cutting parameters on measured variables were interpreted considering graphs. According to results, temperature and acoustic emission signals seem to be effective about 74% for flank wear. In addition, fuzzy logic based prediction of flank wear was performed with the assistance of temperature and acoustic emission sensors with high accuracy which demonstrates their availability for sensor fusion. Tool breakage occurs instantly which can prevent with the assistance of sensor signals and tangential and feed cutting forces, acoustic emission and vibration signals seem as reliable indicators for approaching major breakage. Sensor fusion based turning provides confirmed information which enables more reliable, robust and consistent machining.
Atıf Kaynağı
Atıf Yapan Yayın
Monitoring Built-Up Edge, Chipping, Thermal Cracking, and Plastic Deformation of Milling Cutter Inserts through Spindle Vibration Signals
Scopus
Havuzumuzda Open Access 8 atıf almış
Condition monitoring provides insights into the type of damage occurring in the cutting tool during machining to facilitate its timely maintenance or replacement. By detecting and analyzing machining consequences (vibrations, chatter, noise, power consumption, spindle load, etc.), correlating them with different tool conditions enables real-time monitoring and the automated detection of tool failures. Machine learning (ML) plays a vital role in making tool condition monitoring (TCM) frameworks intelligent, and most research is geared toward classifying various types of tool wear. However, monitoring built-up edges, chipping, thermal cracking, and plastic deformation of milling cutter inserts are challenging and need careful consideration. To effectively monitor these phenomena, spindle vibrations can narrate the corresponding dynamic behavior of tool conditions and therefore have been investigated in this research. The acquired vibration data are then analyzed using histogram features and trained through the Partial C4.5 (PART) classifier to extract meaningful recommendations related to the milling cutter inserts condition.
Atıf Yapan Makale Bilgileri
Kurumlar (5)
Bydgoszcz University of Science and Technology
Bydgoszcz, Poland
COEP Technological University, Pune
Pune, India
MKSSS’s Cummins College of Engineering for Women
Pune, India
Rizvi College of Engineering
Mumbai, India
Selçuk Üniversitesi
Selçuklu, Turkey