Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Evaluation of two post core systems using two different methods (fracture strength test and a finite elemental stress analysis)
Scopus
Toplam 193 atıf DOI
The aim of this study was to compare a fiber composite laminate (FCL) post core and a conventional cast post core system by using two different methods. The first method was a conventional fracture strength test, and the second was a finite elemental stress-analysis method (FEM). For the conventional fracture strength test, 20 extracted, human upper, central incisors were used. The teeth were decoronated, treated endodontically, and restored with two post core systems. After embedding the samples in resin blocks, a loading force was applied to the teeth at a crosshead speed of 5 mm/ min at an angle of 45 degrees to the long axis of the ooth. The data were recorded, and the results were compared by using the Mann-Whitney U test. There was no statistically significant difference between the two post systems (p>0.05). For FEM analysis, a pseudo three-dimensional model of a maxillary central incisor, theoretically restored with either a cast post or an FCL, was used. The analysis was performed by using the structural analysis program (SAP90). FEM analysis showed that stress was accumulated within the cast post core system, and transmission of stress to supportive structures and the tooth was low. This is an advantage for tooth and supporting tissues. When the FCL post core system was evaluated by FEM, the results indicated that this system transferr stress to supportive structures and the tooth while stress accumulation within the post system was low. This is an advantage for the restoration but disadvantage for the supporting tissues. Copyright © 2002 by The American Association of Endodontists.
Atıf Kaynağı
Atıf Yapan Yayın
Effects of NaOCl, EDTA and MTAD when applied to dentine on stress distribution in post-restored roots with flared canals
Scopus
Havuzumuzda 16 atıf almış
Aim: To evaluate the effect of NaOCl, EDTA and MTAD on the stress distribution and levels in roots with flared canals and three different aesthetic post systems using finite element stress analysis (FEA). Methodology: Three-dimensional (3D) FEA models simulating a maxillary incisor with excessive structural loss and flared root canals were created. The dentine of the first models of each post group was assumed as homogenous, whereas the others were deemed as having their elastic modulus affected up to 100 μm deep as a result of irrigation protocol (5.25 NaOCl, 17% EDTA and MTAD for 2 h). A sound incisor tooth model was used as the control. Restorations were created according to the post system used (pre-fabricated fibre post (PFP)), polyethylene fibre (Ribbond) post and core build-up (RBP), and one-piece milled zirconia post and core (ZP). Ceramic crowns were added to the models. A 300-N static load was applied at the centre of the palatal surface of the models to calculate the stress distributions. The SolidWorks/Cosmosworks structural analysis programmes were used for FEA analysis. Results were presented by considering von Mises criteria. Results: The analysis of the von Mises stresses revealed that RBP created less stress in the remaining root dentine when compared to PFP and ZP. ZP maintained the stresses inside its body and reduced stress on the palatal surface of the root; however, it forwarded more stress towards the apical area. NaOCl-, EDTA- and MTAD-treated dentine increased the stresses within the root structure regardless of the effect of the post system used (11-15.4 MPa for PFP, 9.5-13.02 MPa for RBP and 14.2 MPa for ZP). Amongst the irrigation solutions used, EDTA and MTAD increased the stresses more than NaOCl in all models. All the irrigation solutions showed the same stress levels and distributions in the ZP model. Conclusion: NaOCl-, EDTA- and MTAD- treated dentine and a rigid post with high elastic modulus may increase fracture risk in roots with flared canals by increasing the stresses within root dentine. Therefore, solutions that alter the elastic modulus of dentine less (such as NaOCl) or an individually shaped post-core system constructed with a material that has an elastic modulus close to dentine (polyethylene fibre) should be used in weak roots.
Atıf Yapan Makale Bilgileri
Kurumlar (3)
Beyhekim Oral and Dental Health Center
Konya, Turkey
Selçuk Üniversitesi
Selçuklu, Turkey
Van Yüzüncü Yıl Üniversitesi
Van, Turkey