Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Performance characteristics of a low heat rejection diesel engine operating with biodiesel
Scopus
Toplam 210 atıf DOI
Vegetable oils are a promising alternative among the different diesel fuel alternatives. However, the high viscosity, poor volatility and cold flow characteristics of vegetable oils can cause some problems such as injector coking, severe engine deposits, filter gumming, piston ring sticking and thickening of lubrication oil from long-term use in diesel engines. These problems can be eliminated or minimized by transesterification of the vegetable oils to form monoesters. These monoesters are known as biodiesel. The important advantages of biodiesel are lower exhaust gas emissions and its biodegradability and renewability compared with petroleum-based diesel fuel. Although the transesterification improves the fuel properties of vegetable oil, the viscosity and volatility of biodiesel are still worse than that of petroleum diesel fuel. The energy of the biodiesel can be released more efficiently with the concept of low heat rejection (LHR) engine. The aim of this study is to apply LHR engine for improving engine performance when biodiesel is used as an alternative fuel. For this purpose, a turbocharged direct injection (DI) diesel engine was converted to a LHR engine and the effects of biodiesel (produced from sunflower oil) usage in the LHR engine on its performance characteristics have been investigated experimentally. The results showed that specific fuel consumption and the brake thermal efficiency were improved and exhaust gas temperature before the turbine inlet was increased for both fuels in the LHR engine. © 2007 Elsevier Ltd. All rights reserved.
Atıf Kaynağı
Atıf Yapan Yayın
Performance and energy balance of a low heat rejection diesel engine operated with diesel fuel and ethanol blend
Scopus
Havuzumuzda 10 atıf almış
In this study, it was aimed to investigate the effect of ceramic coating on a turbocharged diesel engine performance and energy balance. For this purpose, cylinder head, valves and pistons of the engine were coated with yttria stabilized zirconia layer with a thickness of 0.35 mm nickel-chromiumaluminium bond coat, as well as the atmospheric plasma spray coating method with a thickness of 0.15 mm. Then, the engines were tested for full load. The heating values of the diesel fuel and ethanol were 46.2 and 25.182MJ/kg, respectively. Because of the lower heating values of the ethanol, compared with the diesel fuel, it appears to have lower following to engine power, torque and SFC. Compare to engine power of SDE, LHRe has increased about 2%, LHReth has decreased about 22%at all engine speed. Compare to engine torque of SDE, LHRe has increased about 2.5%, LHReth has decreased about 23 % at all engine speeds. Compare to SFC of SDE, LHRe has decreased about 1.1 %, LHReth has increased about 54 % at all engine speeds. Compare to exhaust turbine inlet temperature of SDE, LHRe has increased about 15 %, LHReth has decreased about 17 % at all engine speeds.
Atıf Yapan Makale Bilgileri
Kurumlar (1)
Selçuk Üniversitesi
Selçuklu, Turkey