Kurumun Atıf Alan Makalesi
Atıf Alan Yayın
Optimization of tool geometry parameters for turning operations based on the response surface methodology
Scopus
Toplam 237 atıf DOI
This investigation focuses on the influence of tool geometry on the surface finish obtained in turning of AISI 1040 steel. In order to find out the effect of tool geometry parameters on the surface roughness during turning, response surface methodology (RSM) was used and a prediction model was developed related to average surface roughness (Ra) using experimental data. The results indicated that the tool nose radius was the dominant factor on the surface roughness. In addition, a good agreement between the predicted and measured surface roughness was observed. Therefore, the developed model can be effectively used to predict the surface roughness on the machining of AISI 1040 steel with in 95% confidence intervals ranges of parameters studied. © 2010 Elsevier Ltd. All rights reserved.
Atıf Kaynağı
Atıf Yapan Yayın
Nano-hybridization effects of nano-silica and nano-graphene platelet on mechanical properties of E-glass/epoxy nanocomposites
Scopus
Havuzumuzda 14 atıf almış
This study reveals the nano-hybridization effects of nano-graphene platelets (NGPs) and nano-silica (SiO2 nanoparticle), having different structural geometries on the mechanical properties, nano and micro-scale failure behaviors, and nanoscale fracture mechanisms of E-glass/epoxy composites. Tensile, three-point bending, and Charpy impact experiments were applied to determine the mechanical behaviors of 0.5 wt.% NGPs, 4 wt.% nano-silica and 0.5 wt.% NGPs + 4 wt.% nano-silica nanohybrid filled E-glass/epoxy and neat E-glass/epoxy composite samples. Failure of composite samples was examined by microscopy and SEM analysis. FTIR analyses were conducted to interpret the chemical and physical interactions between the nanoparticles and epoxy resin. Nano-hybridization exhibited the highest tensile strength and three-point flexural force for the composite samples. However, the NGPs filled nanocomposites also exhibited the best static tensile toughness and impact energy absorption. The experimental data showed that it was statistically significant as a result of the one-way ANOVA analysis. Remarkably, nano-hybridization of nano-silica and NGPs showed different fracture mechanisms at the nano and micro-scales.
Atıf Yapan Makale Bilgileri
Kurumlar (1)
Selçuk Üniversitesi
Selçuklu, Turkey